PPF kits for the Toyota Tacoma (2024+, fourth generation)
Showing kits that fit the Trailhunter trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit (Trailhunter)
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$715USDFront Bumper Kit (Trailhunter)
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$393USDGrille Kit (Trailhunter)
Film for the painted grille surround and bars, where bugs and gravel hit first. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$101USDFull Hood, Fender & Mirror Kit
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood.
from≈$678USDPartial Hood, Fender & Mirror Kit
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers.
from≈$335USDHeadlamp & Fog Lamp Kit (Trailhunter)
Pre-cut film for both headlamps, plus both fog lamps on cars that have them. Keeps the lenses clear and chip free. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
≈$109USDRocker Panel Kit (Trailhunter)
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$313USDA-Pillar & Roof Edge Kit
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
from≈$145USDRoof Kit
The full painted roof panel, popular in colour film for a contrast roof.
from≈$510USDDoor Edge & Wear-and-Tear Kit
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
from≈$101USDRear Bumper Kit
Full rear bumper coverage including the lower diffuser area.
from≈$452USDTailgate Kit
Full tailgate face in one piece, with relief for the badge, camera and handle.
from≈$393USDLeft Side Kit (Trailhunter)
The left cab door(s) and left rocker panel in seamless pieces. Bed sides are not included. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$1,021USDRight Side Kit (Trailhunter)
The right cab door(s) and right rocker panel in seamless pieces. Bed sides are not included. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$1,021USDFull Body Kit (Trailhunter)
Every painted panel on the cab and front end (bed sides and tailgate inner not included), including the roof. Delivered as a numbered set with an installation map. Cut for the Trailhunter bumper, grille, headlights and rocker panels (its hood & fenders share the TRD Off-Road pattern).
from≈$2,058USD
Is this your car? How to recognise the Toyota Tacoma (2024+, fourth generation)
- Tundra-style nose with a tall grille and slim headlights
- Front bumper patterns: TRD Off-Road / PreRunner / TRD Sport / Limited share one; SR / SR5 another; TRD Pro and Trailhunter each have their own
- Hood & fender patterns: TRD Off-Road / PreRunner / Trailhunter share one; SR / SR5, Limited, TRD Sport (hood scoop) and TRD Pro each have their own
- TRD Pro and Trailhunter have their own headlights, painted grille surround and rocker panels; SR / SR5 have their own rocker panels too
- Rear bumper: SR has its own pattern, TRD Pro its own; the other trims share one
- Front and rear parking sensors vary by trim: choose both on bumper kits
- Double Cab (four doors, 5-ft or 6-ft bed) or XtraCab (two doors, 6-ft bed): choose the cab and bed on side, rocker, roof and full-body kits
DIY PPF kits for the Toyota Tacoma (2024+, fourth generation)
There are 59 pre-cut kits for this body, from small areas to full coverage, starting at ≈$101USD. The full front kit is ≈$715USD and the full body kit ≈$2,058USD, in clear gloss.
Kits are listed for 7 trims: TRD Off-Road / TRD PreRunner, SR, SR5, Limited, TRD Sport, TRD Pro and Trailhunter. Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification, checked against North American and Latin American cars. On the kit page you choose your car’s front parking sensors, fog lamps, cab / doors, roof type and rear parking sensors, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2024 onwards. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without front parking sensors and rear parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
- Which cars do these kits not fit?
- Bed sides and bed rails (no kit covers the bed).