PPF kits for the Toyota RAV4 (2019–2025, XA50)
Showing kits that fit the Hybrid XSE trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit (Hybrid XSE)
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package. Cut for the Hybrid XSE sport lower bumper, grille and headlight pattern.
from≈$685USDFront Bumper Kit (Hybrid XSE)
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions. Cut for the Hybrid XSE sport lower bumper, grille and headlight pattern.
from≈$379USDGrille Kit (Hybrid XSE)
Film for the painted grille surround and bars, where bugs and gravel hit first. Cut for the Hybrid XSE sport lower bumper, grille and headlight pattern.
from≈$94USDFull Hood, Fender & Mirror Kit
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood.
from≈$649USDPartial Hood, Fender & Mirror Kit
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers.
from≈$320USDHeadlamp & Fog Lamp Kit (Hybrid XSE)
Pre-cut film for both headlamps, plus both fog lamps on cars that have them. Keeps the lenses clear and chip free. Cut for the Hybrid XSE sport lower bumper, grille and headlight pattern.
≈$109USDRocker Panel Kit
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels.
from≈$299USDA-Pillar & Roof Edge Kit
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
from≈$138USDRoof Kit
The full painted roof panel, popular in colour film for a contrast roof.
from≈$488USDDoor Edge & Wear-and-Tear Kit
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
from≈$94USDRear Bumper Kit
Full rear bumper coverage including the lower diffuser area.
from≈$430USDHatch Kit
Full rear hatch below the glass, with relief cuts for the badges, wiper and camera.
from≈$430USDTrunk Ledge Kit
The loading edge of the trunk that gets scuffed by luggage and shopping.
from≈$65USDLeft Side Kit
Both left doors, the left rear quarter and the left rocker panel in seamless pieces.
from≈$977USDRight Side Kit
Both right doors, the right rear quarter and the right rocker panel in seamless pieces.
from≈$977USDFull Body Kit (Hybrid XSE)
Every painted panel on the car, including the roof. Delivered as a numbered set with an installation map. Cut for the Hybrid XSE sport lower bumper, grille and headlight pattern.
from≈$1,970USD
Is this your car? How to recognise the Toyota RAV4 (2019–2025, XA50)
- Squared-off, truck-like nose with a tall trapezoid lower grille
- Angular headlights that step down toward the grille
- Fog lamps and front parking sensors vary by trim and package: choose both on bumper kits
- Adventure / TRD Off-Road / Trail (Canada) have a bolder bumper with a two-bar grille and painted fender flares, so their bumper, grille and hood & fender kits are cut separately
- RAV4 Hybrid XSE has its own sport lower bumper and its own headlight pattern
- RAV4 Prime SE / XSE (plug-in) has its own front and rear bumpers and headlight pattern; doors, sills, hood and fenders use the standard patterns
- Rear bumper, doors, sills, hood and roof patterns are shared by every other trim; the rear bumper pattern is the same with or without sensors
- Australian cars have their own front bumper pattern: choose the vehicle specification
DIY PPF kits for the Toyota RAV4 (2019–2025, XA50)
There are 33 pre-cut kits for this body, from small areas to full coverage, starting at ≈$65USD. The full front kit is ≈$685USD and the full body kit ≈$1,970USD, in clear gloss.
Kits are listed for 4 trims: LE / XLE / XLE Premium / Limited / Hybrid LE, XLE, SE, Woodland, Limited, Adventure / TRD Off-Road / Trail, Hybrid XSE and Prime SE / XSE (plug-in). Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification, checked against North American, Latin American, European, UK, Asian and Australian cars. On the kit page you choose your car’s front parking sensors, fog lamps and roof type, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2019 – 2025. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without front parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.