Skip to main content
Kutfit

PPF kits for the GMC Sierra 1500 (2019–2022, T1XX, fourth generation)

Wide headlights, tall block grille

Kits shown for North American-specification cars (from your country: United States).

Not sure which kit?

Most people choose one of these. Every kit below is cut for this body.

Is this your car? How to recognise the GMC Sierra 1500 (2019–2022, T1XX, fourth generation)

  • Wide headlights with a vertical daytime-light strip beside a tall grille; fog lamps in the lower bumper corners
  • Sold as the 2019 to 2021 Sierra 1500, then as the Sierra 1500 Limited (Pro / SLE / SLT / Elevation / AT4 / Denali) alongside the 2022 refresh
  • SLT, AT4 and Denali share one front bumper; Base, Pro, SLE and Elevation share another; Elevation also has its own grille
  • One hood, fender, headlight and rear bumper pattern for every trim; the sill patterns differ by cab and bed
  • Front and rear parking sensors (PDC) on some trucks: choose both on bumper kits; the Duramax diesel changes the front bumper opening
  • Regular Cab, Double Cab or Crew Cab with 5 ft 8 in, 6½-ft or 8-ft beds: choose the cab on side, rocker, roof and full-body kits; crew cabs may have a sunroof or roof marker lamps
Compare bodies Not sure? Send us a photo

DIY PPF kits for the GMC Sierra 1500 (2019–2022, T1XX, fourth generation)

There are 21 pre-cut kits for this body, from small areas to full coverage, starting at ≈$101USD. The full front kit is ≈$744USD and the full body kit ≈$2,145USD, in clear gloss.

Kits are listed for 3 trims: Base / Pro / SLE, Elevation and SLT / AT4 / Denali. Where a trim has its own bumper, grille or side skirts, it gets its own kit.

Patterns follow the North American specification. On the kit page you choose your car’s front bumper type, front parking sensors, fog lamps, fender flares, cab / doors, roof type and rear parking sensors, and the pieces are cut to match.

Questions about this body

Which years does this cover?
2019 – 2022. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
Are sensor and camera cut-outs included?
Yes, when your car has them. On the kit page choose with or without front parking sensors and rear parking sensors, and the pieces are cut to match.
Do I need an installer?
No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
Can I get it in matte or a colour?
Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
How long does it take to arrive?
Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
Which cars do these kits not fit?
AT4X (2022+). 2022+ refreshed Sierra 1500. Sierra 2500 HD / 3500 HD.