Skip to main content
Kutfit

Full Body PPF Kit (SR5)

DIY pre-cut, for the Toyota Tacoma (2024+, fourth generation), SR5.

Fits the Toyota Tacoma (2024+, fourth generation)SR5

How to recognise this generation
  • Tundra-style nose with a tall grille and slim headlights
  • Front bumper patterns: TRD Off-Road / PreRunner / TRD Sport / Limited share one; SR / SR5 another; TRD Pro and Trailhunter each have their own
  • Hood & fender patterns: TRD Off-Road / PreRunner / Trailhunter share one; SR / SR5, Limited, TRD Sport (hood scoop) and TRD Pro each have their own
  • TRD Pro and Trailhunter have their own headlights, painted grille surround and rocker panels; SR / SR5 have their own rocker panels too
  • Rear bumper: SR has its own pattern, TRD Pro its own; the other trims share one
  • Front and rear parking sensors vary by trim: choose both on bumper kits
  • Double Cab (four doors, 5-ft or 6-ft bed) or XtraCab (two doors, 6-ft bed): choose the cab and bed on side, rocker, roof and full-body kits

Clear gloss on your selected panels

Updates as you choose
Top view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Tailgate
Top
Front view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Tailgate
Front
Rear view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Tailgate
Rear

Clear gloss. Diagram shows coverage and finish; actual cut lines depend on your vehicle.

What is covered

  • Both fenders
  • Mirror caps
  • Headlamps
  • Fog lamps
  • A-pillars
  • Front doors
  • Rear doors
  • Rocker panels
  • Full hood
  • Front bumper
  • Grille
  • Roof
  • Door edges
  • Door handle cups
  • Rear bumper
  • Tailgate
≈$2,058USD

Every painted panel on the cab and front end (bed sides and tailgate inner not included), including the roof. Delivered as a numbered set with an installation map. Cut for the SR / SR5 front bumper, hood & fenders and rocker panels.

Options

Front parking sensors
Rear parking sensors
Fog lamps
Roof type
Cab / doors
Film finish

Headlamps and fog lamps are always cut in clear film.

Same pattern for North American and Latin American cars.

Imported car? Change the specification

Kits shown for North American-specification cars (from your country: United States).

A rigid shipping tube with rolled film pieces inside

What you get

  • Pre-cut pieces for every panel listed above, each labelled to match the installation map
  • Squeegee, microfibre cloth and installation solution to mix with water (spray bottle not included)
  • Rolled in a rigid tube, cut to order

Not covered by this kit (check before you order):

  • Bed sides and bed rails (no kit covers the bed)

Cut for the Toyota Tacoma (2024+, fourth generation). Not sure it’s your car? Ask us before you order.

  • Free shipping in Canada · tracked shipping worldwide
  • Cut to order, ships in 2–4 business days

Pre-cut for you to apply at home. See the DIY guide.

First time installing PPF? Get the practice pack to try it on a spare piece first. It has a swatch of every colour too.