Skip to main content
Kutfit

Full Body PPF Kit (Signature)

DIY pre-cut, for the Mazda CX-5 (2022–2025, KF refresh).

Fits the Mazda CX-5 (2022–2025, KF refresh)Signature / Turbo Signature

How to recognise this generation
  • European, UK and Asian cars have their own rear bumper pattern: choose the vehicle specification
  • Reshaped front and rear bumpers with a wider lower grille and vertical air-curtain slots in the corners
  • Headlights keep the slim outline but carry a new LED signature (one pattern fits every trim); the fog lamps were deleted
  • Two front bumper, hood & fender and sill patterns: GX / GS / S / Kuro / Carbon Edition (and US S Select / S Preferred), or GT / Sport Design / Suna / Signature / every Turbo (body-colour lower trim and flared fenders)
  • Rear bumper patterns: GX / GS / S / Kuro / Carbon Edition; GT / Sport Design / Suna / Turbo and US S Select / S Preferred; Signature / Turbo Signature
  • Doors, roof and headlights are shared; front sensors on the GT group, rear sensors on GS and up: choose the sensor options
  • Roof: solid, or a conventional power moonroof (single opening) on GS and up; no panoramic roof was offered: choose the roof type on roof and full-body kits
  • Sold alongside the 2026 third generation during run-out in North America; the last new sale of this body is not yet evidenced

Miami Blue on your selected panels

Updates as you choose
Top view. Coverage: Both fenders, Mirror caps, Headlamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Top
Front view. Coverage: Both fenders, Mirror caps, Headlamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Front
Rear view. Coverage: Both fenders, Mirror caps, Headlamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Rear

Miami Blue on 23 panels · clear on 2 lamp panels. Diagram shows coverage and finish; actual cut lines depend on your vehicle.

What is covered

  • Both fenders
  • Mirror caps
  • Headlamps
  • A-pillars
  • Front doors
  • Rear doors
  • Rocker panels
  • Rear quarters
  • Full hood
  • Front bumper
  • Grille
  • Roof
  • Door edges
  • Door handle cups
  • Rear bumper
  • Trunk lid
  • Trunk ledge / loading edge
≈$2,562USD

Every painted panel on the car, including the roof. Delivered as a numbered set with an installation map. Cut for the Signature front and rear bumpers, hood & fenders and sills.

Options

Vehicle specification

The market your car was built for, not where it is driven now. It is preselected from your country: change it if the car was imported.

Front parking sensors
Rear parking sensors
Headlamp washers
Roof type
Film finish

Colour: Miami Blue

Headlamps and fog lamps are always cut in clear film.

Imported car? Change the specification

Kits shown for North American-specification cars (from your country: United States).

A rigid shipping tube with rolled film pieces inside

What you get

  • Pre-cut pieces for every panel listed above, each labelled to match the installation map
  • Squeegee, microfibre cloth and installation solution to mix with water (spray bottle not included)
  • Rolled in a rigid tube, cut to order

Cut for the Mazda CX-5 (2022–2025, KF refresh). Not sure it’s your car? Ask us before you order.

  • Free shipping in Canada · tracked shipping worldwide
  • Cut to order, ships in 2–4 business days

Pre-cut for you to apply at home. See the DIY guide.

First time installing PPF? Get the practice pack to try it on a spare piece first. It has a swatch of every colour too.