Skip to main content
Kutfit

PPF kits for the Kia Niro (2023+, SG2)

Slim light bar, boomerang taillight pillar, closed nose on EV

Kits shown for North American-specification cars (from your country: United States).

Not sure which kit?

Most people choose one of these. Every kit below is cut for this body.

Is this your car? How to recognise the Kia Niro (2023+, SG2)

  • Second-generation Niro with slim headlights, a body-colour C-pillar and roof rails
  • EX Touring, SX and SX Touring share one pattern set
  • LX and EX have their own front bumper, hood and side sills
  • Niro EV Wave and Wind have a closed nose with their own front bumper; hood, sills and roof are shared
  • Plug-In Hybrid has a charging door in the left front fender: choose the charging-door option on hood / fender kits
  • Fog lamps on upper trims: choose the fog option; sunroof on upper trims: choose the roof option
Compare bodies Not sure? Send us a photo

DIY PPF kits for the Kia Niro (2023+, SG2)

There are 30 pre-cut kits for this body, from small areas to full coverage, starting at ≈$65USD. The full front kit is ≈$685USD and the full body kit ≈$1,970USD, in clear gloss.

Kits are listed for 4 trims: EX Touring / SX / SX Touring, LX / EX, EV Wave and EV Wind. Where a trim has its own bumper, grille or side skirts, it gets its own kit.

Patterns follow the North American specification, checked against North American, Latin American, European, UK and Australian cars. On the kit page you choose your car’s front parking sensors, fog lamps, charging door and roof type, and the pieces are cut to match.

Questions about this body

Which years does this cover?
2023 onwards. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
Are sensor and camera cut-outs included?
Yes, when your car has them. On the kit page choose with or without front parking sensors, and the pieces are cut to match.
Do I need an installer?
No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
Can I get it in matte or a colour?
Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
How long does it take to arrive?
Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.