PPF kits for the Ford F-150 (2018–2020, thirteenth gen facelift)
Showing kits that fit the Limited trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit (Limited)
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package. Cut for the Limited hood & fender pattern.
from≈$715USDFront Bumper Kit
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions.
from≈$393USDGrille Kit
Film for the painted grille surround and bars, where bugs and gravel hit first.
from≈$101USDFull Hood, Fender & Mirror Kit (Limited)
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood. Cut for the Limited hood & fender pattern.
from≈$678USDPartial Hood, Fender & Mirror Kit (Limited)
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers. Cut for the Limited hood & fender pattern.
from≈$335USDHeadlamp & Fog Lamp Kit
Pre-cut film for both headlamps, plus both fog lamps on cars that have them. Keeps the lenses clear and chip free.
≈$109USDRocker Panel Kit
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels.
from≈$313USDA-Pillar & Roof Edge Kit
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
from≈$145USDRoof Kit
The full painted roof panel, popular in colour film for a contrast roof.
from≈$510USDDoor Edge & Wear-and-Tear Kit
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
from≈$101USDRear Bumper Kit
Full rear bumper coverage including the lower diffuser area.
from≈$452USDTailgate Kit
Full tailgate face in one piece, with relief for the badge, camera and handle.
from≈$393USDLeft Side Kit
The left cab door(s) and left rocker panel in seamless pieces. Bed sides are not included.
from≈$1,021USDRight Side Kit
The right cab door(s) and right rocker panel in seamless pieces. Bed sides are not included.
from≈$1,021USDFull Body Kit (Limited)
Every painted panel on the cab and front end (bed sides and tailgate inner not included), including the roof. Delivered as a numbered set with an installation map. Cut for the Limited hood & fender pattern.
from≈$2,058USD
Is this your car? How to recognise the Ford F-150 (2018–2020, thirteenth gen facelift)
- Twin horizontal grille bars (chrome or black by trim); one front bumper pattern fits every trim
- C-clamp shaped headlights, halogen or LED by trim: choose the headlight type on lamp kits; fog lamps in the lower bumper
- Limited has its own hood & fender pattern
- Optional fender flares change the bumper, fender, sill and quarter patterns: choose the flare option
- No factory front parking sensors; rear sensors on some trucks: choose the rear-sensor option on rear bumper kits
- Regular Cab, SuperCab (rear-hinged half doors) or SuperCrew (four full doors), with 5½-, 6½- or 8-ft beds: choose the cab and bed on side, rocker, roof and full-body kits
- Raptor is a wide body with a FORD block-letter grille (not this kit)
- Conventional sideview mirrors or optional telescoping trailer-tow (PowerScope) mirrors with different caps: choose the mirror option on hood / fender / mirror kits
- Grille insert differs by trim and appearance package (verified per generation from the Ford order guide): choose the grille type on grille kits
DIY PPF kits for the Ford F-150 (2018–2020, thirteenth gen facelift)
There are 19 pre-cut kits for this body, from small areas to full coverage, starting at ≈$101USD. The full front kit is ≈$715USD and the full body kit ≈$2,058USD, in clear gloss.
Kits are listed for 2 trims: XL / XLT / Lariat / King Ranch / Platinum and Limited. Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification. On the kit page you choose your car’s fog lamps, mirror caps, grille type, headlight type, fender flares, cab / doors, roof type and rear parking sensors, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2018 – 2020. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without rear parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
- Which cars do these kits not fit?
- Raptor (wide body). Shelby F-150 / Shelby Raptor.