PPF kits for the Toyota Tundra (2022+, XK70)
Showing kits that fit the SR5 trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit (SR5)
Clear gloss selected
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package. Cut for the SR5 front bumper and hood & fenders.
≈$715USDFront Bumper Kit (SR5)
Clear gloss selected
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions. Cut for the SR5 front bumper and hood & fenders.
≈$393USDGrille Kit
Clear gloss selected
Film for the painted grille surround and bars, where bugs and gravel hit first.
≈$101USDFull Hood, Fender & Mirror Kit (SR5)
Clear gloss selected
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood. Cut for the SR5 front bumper and hood & fenders.
≈$678USDPartial Hood, Fender & Mirror Kit (SR5)
Clear gloss selected
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers. Cut for the SR5 front bumper and hood & fenders.
≈$335USDHeadlamp & Fog Lamp Kit
Clear gloss selected
Pre-cut film for both headlamps, plus both fog lamps on cars that have them. Keeps the lenses clear and chip free.
≈$109USDRocker Panel Kit
Clear gloss selected
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels.
≈$313USDA-Pillar & Roof Edge Kit
Clear gloss selected
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
≈$145USDRoof Kit
Clear gloss selected
The full painted roof panel, popular in colour film for a contrast roof.
≈$510USDDoor Edge & Wear-and-Tear Kit
Clear gloss selected
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
≈$101USDRear Bumper Kit
Clear gloss selected
Full rear bumper coverage including the lower diffuser area.
≈$452USDTailgate Kit
Clear gloss selected
Full tailgate face in one piece, with relief for the badge, camera and handle.
≈$393USDLeft Side Kit
Clear gloss selected
The left cab door(s) and left rocker panel in seamless pieces. Bed sides are not included.
≈$1,021USDRight Side Kit
Clear gloss selected
The right cab door(s) and right rocker panel in seamless pieces. Bed sides are not included.
≈$1,021USDFull Body Kit (SR5)
Clear gloss selected
Every painted panel on the cab and front end (bed sides and tailgate inner not included), including the roof. Delivered as a numbered set with an installation map. Cut for the SR5 front bumper and hood & fenders.
≈$2,058USD
Is this your car? How to recognise the Toyota Tundra (2022+, XK70)
- Third-generation Tundra with a very large squared grille, slim headlights and a flat, wide hood
- 1794 Edition and Capstone share the base pattern set; Limited has its own front bumper and grille, Platinum its own front bumper
- SR and SR5 each have their own front bumper and hood; TRD Pro has its own front bumper, hood and rear bumper
- Double Cab and CrewMax have different rocker panels: choose the cab on side, rocker, roof and full-body kits
- Front and rear parking sensors vary by trim and package: choose the sensor options on bumper kits
- i-FORCE MAX hybrid models share every panel with the V6 trucks
- Australian cars have their own roof pattern: choose the vehicle specification
DIY PPF kits for the Toyota Tundra (2022+, XK70)
There are 38 pre-cut kits for this body, from small areas to full coverage, starting at ≈$101USD. The full front kit is ≈$715USD and the full body kit ≈$2,058USD, in clear gloss.
Kits are listed for 6 trims: 1794 Edition / Capstone, Limited, Platinum, SR, SR5 and TRD Pro. Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification, checked against North American, Latin American and Australian cars. On the kit page you choose your car’s front parking sensors, fog lamps, fender flares, cab / doors, roof type and rear parking sensors, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2022 onwards. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without front parking sensors and rear parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
- Which cars do these kits not fit?
- Bed sides and bed rails (no kit covers the bed).