Skip to main content
Kutfit

PPF kits for the Subaru WRX (2015–2021, VA)

Showing kits that fit the WRX STI 2020 – 2021 trim.

Hood scoop, large lower grille, fog lamps

Kits shown for North American-specification cars (from your country: United States).

Not sure which kit?

Most people choose one of these. Every kit below is cut for this body.

Is this your car? How to recognise the Subaru WRX (2015–2021, VA)

  • Hood scoop and a large lower grille; the 2018 refresh reshaped the bumper lightly but every film pattern carried over, so 2015–2021 cars share one body
  • LED fog lamps on Sport / Sport-tech; the base WRX has blank inserts: choose the fog option
  • WRX STI shares the WRX front bumper pattern through 2019 (cut without the STI under-spoiler); the 2020–2021 STI has its own front bumper. Every STI has the large STI rear wing; hood, fenders, doors, sills and rear bumper are shared with the WRX
  • Small trunk-lip spoiler optional on the WRX: choose the spoiler option
  • European and UK cars have their own trunk lid / rear wing pattern: choose the vehicle specification
  • Rear sonar sensors (Reverse Automatic Braking) on Sport-tech with EyeSight (CVT); other WRX trims and every STI have none: choose the rear-sensor option on rear bumper and full-body kits
  • Roof: solid, or the power tilt / sliding moonroof (single opening) on Sport-tech; no panoramic roof: choose the roof type on roof and full-body kits

DIY PPF kits for the Subaru WRX (2015–2021, VA)

There are 23 pre-cut kits for this body, from small areas to full coverage, starting at ≈$58USD. The full front kit is ≈$620USD and the full body kit ≈$1,788USD, in clear gloss.

Kits are listed for 3 trims: WRX / Sport / Sport-tech / RS / Premium / Limited, WRX STI 2015 – 2019 and WRX STI 2020 – 2021. Where a trim has its own bumper, grille or side skirts, it gets its own kit.

Patterns follow the North American specification, checked against North American, Latin American, European and UK cars. On the kit page you choose your car’s fog lamps, roof type, rear parking sensors and rear spoiler, and the pieces are cut to match.

Questions about this body

Which years does this cover?
2015 – 2021. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
Are sensor and camera cut-outs included?
Yes, when your car has them. On the kit page choose with or without rear parking sensors, and the pieces are cut to match.
Do I need an installer?
No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
Can I get it in matte or a colour?
Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
How long does it take to arrive?
Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
Which cars do these kits not fit?
STI front under-spoiler (lip): the STI bumper is cut without it.