Skip to main content
Kutfit

Full Body PPF Kit (STI 2015–2019)

DIY pre-cut, for the Subaru WRX (2015–2021, VA).

Fits the Subaru WRX (2015–2021, VA)WRX STI 2015 – 2019

How to recognise this generation
  • Hood scoop and a large lower grille; the 2018 refresh reshaped the bumper lightly but every film pattern carried over, so 2015–2021 cars share one body
  • LED fog lamps on Sport / Sport-tech; the base WRX has blank inserts: choose the fog option
  • WRX STI shares the WRX front bumper pattern through 2019 (cut without the STI under-spoiler); the 2020–2021 STI has its own front bumper. Every STI has the large STI rear wing; hood, fenders, doors, sills and rear bumper are shared with the WRX
  • Small trunk-lip spoiler optional on the WRX: choose the spoiler option
  • European and UK cars have their own trunk lid / rear wing pattern: choose the vehicle specification
  • Rear sonar sensors (Reverse Automatic Braking) on Sport-tech with EyeSight (CVT); other WRX trims and every STI have none: choose the rear-sensor option on rear bumper and full-body kits
  • Roof: solid, or the power tilt / sliding moonroof (single opening) on Sport-tech; no panoramic roof: choose the roof type on roof and full-body kits

Miami Blue on your selected panels

Updates as you choose
Top view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Top
Front view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Front
Rear view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Rear

Miami Blue on 23 panels · clear on 4 lamp panels. Diagram shows coverage and finish; actual cut lines depend on your vehicle.

What is covered

  • Both fenders
  • Mirror caps
  • Headlamps
  • Fog lamps
  • A-pillars
  • Front doors
  • Rear doors
  • Rocker panels
  • Rear quarters
  • Full hood
  • Front bumper
  • Grille
  • Roof
  • Door edges
  • Door handle cups
  • Rear bumper
  • Trunk lid
  • Trunk ledge / loading edge
≈$2,324USD

Every painted panel on the car, including the roof. Delivered as a numbered set with an installation map. Cut for the large STI rear wing (no sensor cut-outs: the STI was never sold with Reverse Automatic Braking).

Options

Vehicle specification

The market your car was built for, not where it is driven now. It is preselected from your country: change it if the car was imported.

Fog lamps
Rear spoiler
Roof type
Film finish

Colour: Miami Blue

Headlamps and fog lamps are always cut in clear film.

Imported car? Change the specification

Kits shown for North American-specification cars (from your country: United States).

A rigid shipping tube with rolled film pieces inside

What you get

  • Pre-cut pieces for every panel listed above, each labelled to match the installation map
  • Squeegee, microfibre cloth and installation solution to mix with water (spray bottle not included)
  • Rolled in a rigid tube, cut to order

Not covered by this kit (check before you order):

  • STI front under-spoiler (lip): the STI bumper is cut without it

Cut for the Subaru WRX (2015–2021, VA). Not sure it’s your car? Ask us before you order.

  • Free shipping in Canada · tracked shipping worldwide
  • Cut to order, ships in 2–4 business days

Pre-cut for you to apply at home. See the DIY guide.

First time installing PPF? Get the practice pack to try it on a spare piece first. It has a swatch of every colour too.