Skip to main content
Kutfit

Full Body PPF Kit (STI 2020–2021)

DIY pre-cut, for the Subaru WRX (2015–2021, VA).

Fits the Subaru WRX (2015–2021, VA)WRX STI 2020 – 2021

How to recognise this generation
  • Hood scoop and a large lower grille; the 2018 refresh reshaped the bumper lightly but every film pattern carried over, so 2015–2021 cars share one body
  • LED fog lamps on Sport / Sport-tech; the base WRX has blank inserts: choose the fog option
  • WRX STI shares the WRX front bumper pattern through 2019 (cut without the STI under-spoiler); the 2020–2021 STI has its own front bumper. Every STI has the large STI rear wing; hood, fenders, doors, sills and rear bumper are shared with the WRX
  • Small trunk-lip spoiler optional on the WRX: choose the spoiler option
  • European and UK cars have their own trunk lid / rear wing pattern: choose the vehicle specification
  • Rear sonar sensors (Reverse Automatic Braking) on Sport-tech with EyeSight (CVT); other WRX trims and every STI have none: choose the rear-sensor option on rear bumper and full-body kits
  • Roof: solid, or the power tilt / sliding moonroof (single opening) on Sport-tech; no panoramic roof: choose the roof type on roof and full-body kits

Miami Blue on your selected panels

Updates as you choose
Top view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Top
Front view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Front
Rear view. Coverage: Both fenders, Mirror caps, Headlamps, Fog lamps, A-pillars, Front doors, Rear doors, Rocker panels, Rear quarters, Full hood, Front bumper, Grille, Roof, Door edges, Door handle cups, Rear bumper, Trunk lid, Trunk ledge / loading edge
Rear

Miami Blue on 23 panels · clear on 4 lamp panels. Diagram shows coverage and finish; actual cut lines depend on your vehicle.

What is covered

  • Both fenders
  • Mirror caps
  • Headlamps
  • Fog lamps
  • A-pillars
  • Front doors
  • Rear doors
  • Rocker panels
  • Rear quarters
  • Full hood
  • Front bumper
  • Grille
  • Roof
  • Door edges
  • Door handle cups
  • Rear bumper
  • Trunk lid
  • Trunk ledge / loading edge
≈$2,324USD

Every painted panel on the car, including the roof. Delivered as a numbered set with an installation map. Cut for the 2020–2021 STI front bumper and grille and the large STI rear wing (no sensor cut-outs).

Options

Vehicle specification

The market your car was built for, not where it is driven now. It is preselected from your country: change it if the car was imported.

Fog lamps
Rear spoiler
Roof type
Film finish

Colour: Miami Blue

Headlamps and fog lamps are always cut in clear film.

Imported car? Change the specification

Kits shown for North American-specification cars (from your country: United States).

A rigid shipping tube with rolled film pieces inside

What you get

  • Pre-cut pieces for every panel listed above, each labelled to match the installation map
  • Squeegee, microfibre cloth and installation solution to mix with water (spray bottle not included)
  • Rolled in a rigid tube, cut to order

Not covered by this kit (check before you order):

  • STI front under-spoiler (lip): the STI bumper is cut without it

Cut for the Subaru WRX (2015–2021, VA). Not sure it’s your car? Ask us before you order.

  • Free shipping in Canada · tracked shipping worldwide
  • Cut to order, ships in 2–4 business days

Pre-cut for you to apply at home. See the DIY guide.

First time installing PPF? Get the practice pack to try it on a spare piece first. It has a swatch of every colour too.