PPF kits for the Porsche 718 Boxster (2017–2025, 982)
Showing kits that fit the Spyder trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit
Clear gloss selected
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package.
≈$897USDFront Bumper Kit
Clear gloss selected
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions.
≈$496USDFull Hood, Fender & Mirror Kit
Clear gloss selected
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood.
≈$853USDPartial Hood, Fender & Mirror Kit
Clear gloss selected
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers.
≈$430USDHeadlamp & Fog Lamp Kit
Clear gloss selected
Pre-cut film for both headlamps, plus both fog lamps on cars that have them. Keeps the lenses clear and chip free.
≈$138USDRocker Panel Kit (Spyder)
Clear gloss selected
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels. Cut for the Spyder side sills and rear bumper.
≈$401USDA-Pillar & Roof Edge Kit
Clear gloss selected
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
≈$182USDDoor Edge & Wear-and-Tear Kit
Clear gloss selected
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
≈$123USDRear Bumper Kit (Spyder)
Clear gloss selected
Full rear bumper coverage including the lower diffuser area. Cut for the Spyder side sills and rear bumper.
≈$569USDTrunk Lid Kit
Clear gloss selected
Full trunk lid with relief cuts for the badges and camera.
≈$496USDTrunk Ledge Kit
Clear gloss selected
The loading edge of the trunk that gets scuffed by luggage and shopping.
≈$87USDLeft Side Kit (Spyder)
Clear gloss selected
The left door, left rear quarter and left rocker panel in seamless pieces. Cut for the Spyder side sills and rear bumper.
≈$1,284USDRight Side Kit (Spyder)
Clear gloss selected
The right door, right rear quarter and right rocker panel in seamless pieces. Cut for the Spyder side sills and rear bumper.
≈$1,284USDFull Body Kit (Spyder)
Clear gloss selected
Every painted panel on the car (the roof is a folding soft top and not included). Delivered as a numbered set with an installation map. Cut for the Spyder side sills and rear bumper.
≈$2,591USD
Is this your car? How to recognise the Porsche 718 Boxster (2017–2025, 982)
- European, UK, Asian and Australian cars have their own rear bumper pattern: choose the vehicle specification
- Mid-engine roadster with a folding soft top, four-point LED daytime lights and a wide three-part lower front intake
- Boxster, Boxster S, Boxster T and the 2.5-litre Boxster GTS share the standard patterns
- Boxster GTS 4.0 and the Boxster 25 Years have their own side sills and rear bumper; the Spyder has its own side sills and rear bumper
- Spyder RS has its own front bumper, hood, side sills and rear bumper
- Front and rear parking sensors, headlamp washers, fog lamps and the SportDesign front bumper change the cut-outs: choose the options that match your car
DIY PPF kits for the Porsche 718 Boxster (2017–2025, 982)
There are 33 pre-cut kits for this body, from small areas to full coverage, starting at ≈$87USD. The full front kit is ≈$897USD and the full body kit ≈$2,591USD, in clear gloss.
Kits are listed for 4 trims: Boxster / Boxster S / Boxster T / Boxster GTS (2.5) / Boxster Style Edition, Boxster GTS 4.0 / Boxster 25 Years, Spyder and Spyder RS. Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification, checked against North American, European, UK, Asian and Australian cars. On the kit page you choose your car’s front bumper type, front parking sensors, headlamp washers, fog lamps and rear parking sensors, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2017 – 2025. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without front parking sensors and rear parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
- Which cars do these kits not fit?
- 718 Cayman, Cayman GT4 and GT4 RS (coupes, listed as 718 Cayman).