PPF kits for the Mercedes-Benz CLA (2017–2019, C117 facelift)
Showing kits that fit the CLA 250 / CLA 250 4MATIC (Sport) trim.
Kits shown for North American-specification cars (from your country: United States).
Not sure which kit?
Most people choose one of these. Every kit below is cut for this body.
Full Front Kit (CLA 250 Sport)
Clear gloss selected
Everything that takes stone chips on the highway: full bumper, full hood, both fenders, mirror caps and headlamps. Our most popular package. Cut for the CLA 250 Sport front bumper, rear bumper.
≈$744USDFront Bumper Kit (CLA 250 Sport)
Clear gloss selected
Full coverage of the front bumper in one piece with relief cuts for the grille openings and sensor positions. Cut for the CLA 250 Sport front bumper, rear bumper.
≈$415USDGrille Kit
Clear gloss selected
Film for the painted grille surround and bars, where bugs and gravel hit first.
≈$101USDFull Hood, Fender & Mirror Kit
Clear gloss selected
Full hood, both front fenders and mirror caps with wrapped edges. No visible lines on the hood.
≈$707USDPartial Hood, Fender & Mirror Kit
Clear gloss selected
Budget protection for the leading 18 inches of the hood and fenders plus both mirror caps. Ideal for daily drivers.
≈$350USDHeadlamp Kit
Clear gloss selected
Pre-cut film for both headlamp lenses.
≈$94USDRocker Panel Kit
Clear gloss selected
Both rocker panels (sills) below the doors, the area most exposed to gravel thrown by the front wheels.
≈$328USDA-Pillar & Roof Edge Kit
Clear gloss selected
Both A-pillars and the leading edge of the roof, where chips collect above the windshield.
≈$153USDRoof Kit
Clear gloss selected
The full painted roof panel, popular in colour film for a contrast roof.
≈$532USDDoor Edge & Wear-and-Tear Kit
Clear gloss selected
Door edge guards, door handle cups and the trunk loading edge. Protects the areas that get scratched every day.
≈$101USDRear Bumper Kit (CLA 250 Sport)
Clear gloss selected
Full rear bumper coverage including the lower diffuser area. Cut for the CLA 250 Sport front bumper, rear bumper.
≈$474USDTrunk Lid Kit
Clear gloss selected
Full trunk lid with relief cuts for the badges and camera.
≈$415USDTrunk Ledge Kit
Clear gloss selected
The loading edge of the trunk that gets scuffed by luggage and shopping.
≈$72USDLeft Side Kit
Clear gloss selected
Both left doors, the left rear quarter and the left rocker panel in seamless pieces.
≈$1,065USDRight Side Kit
Clear gloss selected
Both right doors, the right rear quarter and the right rocker panel in seamless pieces.
≈$1,065USDFull Body Kit (CLA 250 Sport)
Clear gloss selected
Every painted panel on the car, including the roof. Delivered as a numbered set with an installation map. Cut for the CLA 250 Sport front bumper, rear bumper.
≈$2,145USD
Is this your car? How to recognise the Mercedes-Benz CLA (2017–2019, C117 facelift)
- European and UK cars have their own trunk lid pattern (UK cars also their own headlamp pattern): choose the vehicle specification
- Refreshed first-generation CLA with the 2017 bumpers and headlights; the 2020 CLA (C118) is a different body
- AMG CLA 45 is the main pattern set for the hood, fenders, side panels and sills
- CLA 250 Sport (Sport Package Plus) has its own front and rear bumpers; CLA 250 Base has its own front bumper and side sill panels
- Front and rear parking sensors and headlamp washers change the bumper cut-outs: choose the options that match the car
- Panoramic sunroof or tilt / slide sunroof changes the roof kit
DIY PPF kits for the Mercedes-Benz CLA (2017–2019, C117 facelift)
There are 26 pre-cut kits for this body, from small areas to full coverage, starting at ≈$72USD. The full front kit is ≈$744USD and the full body kit ≈$2,145USD, in clear gloss.
Kits are listed for 3 trims: Mercedes-AMG CLA 45, CLA 250 / CLA 250 4MATIC (Sport) and CLA 250 / CLA 250 4MATIC (Base). Where a trim has its own bumper, grille or side skirts, it gets its own kit.
Patterns follow the North American specification, checked against North American, European and UK cars. On the kit page you choose your car’s front parking sensors, headlamp washers, roof type, rear parking sensors and rear spoiler, and the pieces are cut to match.
Questions about this body
- Which years does this cover?
- 2017 – 2019. Kits are matched to the body shape rather than the model year, so a car built around a changeover can be either body. Compare the pictures, or use Find my fit with the month and country your car was first sold.
- Are sensor and camera cut-outs included?
- Yes, when your car has them. On the kit page choose with or without front parking sensors and rear parking sensors, and the pieces are cut to match.
- Do I need an installer?
- No. Every piece is already cut, so no blade touches your paint: wet the panel, slide the labelled piece into place and squeegee the water out. If it is your first time, a small kit such as the rocker panels is a good place to start. Read the installation guide.
- Can I get it in matte or a colour?
- Yes. Every kit is cut in clear gloss by default, or in matte, or in one of 10 colour films (headlamps and other lamps always stay clear).
- How long does it take to arrive?
- Kits are cut to order and dispatched within 2 to 4 business days; tracked delivery takes about 5 to 14 business days depending on where you are. Shipping is free in Canada. Shipping and returns.
- Which cars do these kits not fit?
- CLA Shooting Brake (not sold in North America). Pre-2017 CLA (original C117 bumpers).